Artikel-Nr.:  GF3176
DJI Phantom 4 Pro - Bild 1
DJI Phantom 4 Pro - Bild 2
DJI Phantom 4 Pro - Bild 3
DJI Phantom 4 Pro - Bild 4
DJI Phantom 4 Pro - Bild 5
DJI Phantom 4 Pro - Bild 6
DJI Phantom 4 Pro - Bild 1 DJI Phantom 4 Pro - Bild 2 DJI Phantom 4 Pro - Bild 3 DJI Phantom 4 Pro - Bild 4 DJI Phantom 4 Pro - Bild 5 DJI Phantom 4 Pro - Bild 6
Hersteller: DJI GmbH
DJI GmbH
Verfügbarkeit:(Lieferzeit: 1-2 Tage)
1.699,00 EUR
inkl. MwSt. und zzgl. Versand
Stk.
zur Zeit nicht lieferbar
An uprated camera is equipped with a 1-inch 20-megapixel sensor capable of shooting 4K/60fps video and Burst Mode stills at 14 fps.
The adoption of titanium alloy and magnesium alloy construction increases the rigidity of the airframe and reduces weight, making the Phantom 4 Pro similar in weight to the Phantom 4.
The FlightAutonomy system adds dual rear vision sensors and infrared sensing systems for a total of five-directions of obstacle sensing and four-directions of obstacle avoidance.
 
Camera with 1-inch 20MP Sensor
The onboard camera has been redesigned to use a 1-inch 20-megapixel CMOS sensor.
A custom engineered lens made up of eight elements is arranged in seven groups, it is the first DJI camera to use a mechanical aperture that eliminates rolling shutter distortion that can occur when taking images of fast moving subjects or when flying at high speed and a mechanical focus.
In effect, it is as powerful as many traditional ground cameras.
More powerful video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate.
Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.        
 
Six-camera navigation system
Three sets of dual vision sensors form a six-camera navigation system that works constantly to calculate the relative speed and distance between the aircraft and an object.
Using this network of forward, rearward and downward vison sensors, the Phantom 4 Pro is able to hover precisely in places without GPS when taking off indoors, or on balconies, or even when flying through windows with minimal pilot control.
In the unlikely event that front and downward sensors are unable to operate, the aircraft can still hover in place using the rear stereo vision system.
The Phantom 4 Pro also is able to fly in complex environments at a flight speed of up to 50kph while avoiding obstacles in its path.
It will automatically adjust its obstacle detection method in line with its flight speed, allowing it to avoid obstacles at high and low speed.
 
What is FlightAutonomy
FlightAutonomy is an advanced aerial intelligence and flight automation platform.
It is made up of a complex network of ten component groups including seven cameras - forward, rearward and downward dual vision sensors and the primary camera - an infrared sensing system, dual-band satellite positioning (GPS and GLONASS), two downward facing ultrasonic rangefinders, redundant IMUs and compasses, and a group of powerful, specialized computing cores.
The Phantom 4 Pro acquires a real-time view of its environment and information about the height and position of nearby obstacles to create a 3D map it can locate itself within.
The IMU and compasses collect crucial flight status, speed and direction data, while redundant IMUs and compasses monitor critical data and rule out possible errors, dramatically enhancing the reliability of flight.
               
Infrared sensing system
The Phantom 4 Pro is the first DJI aircraft to use an infrared sensing system. Placed on the left, and right sides of the aircraft, these measure the distance between the aircraft and any obstacles using infrared 3D scanning. When in Beginner Mode and Tripod Mode, these sensors have a horizontal field of view of 70° and a vertical field of view of 20°, providing a wide view of the scene to the sides of the Phantom, and a maximum range of 23ft (7m). Traditional ultrasonic sensors only have a detection range of 3-5m and may be confused when affected by propeller vibration or when sensing uneven surfaces. The infrared sensing system is able to sense larger areas and measure the distance between the aircraft, identifying the closest objects accurately while avoiding interference, providing more reliable sensing and protection.
 
Draw
Draw is a brand new technology for waypoint control.
Simply draw a route on screen and the Phantom 4 Pro will move in that direction while keeping its altitude locked.
This allows the pilot to focus on camera control and enables more complex shots.
There are two Draw modes that can be used in different scenarios.
Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
Active Track
The Phantom 4 Pro automatically recognizes subjects, follows and captures them as they move, making it easier to get complex shots.
Following fast-moving objects can be very challenging, but advanced image recognition algorithms used by the Phantom 4 Pro allow it to recognize and track the object while keeping it in frame.
This new algorithm also recognizes more subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots.
Pilots can now choose between:
Trace: Follow behind or in front of a subject, avoiding obstacles automatically.
Profile: Fly alongside a subject at a variety of angles to get profile shots of the subject.
Spotlight: Keep the camera trained on a subject while the aircraft flies almost anywhere.
TapFly
Fly in any direction visible on-screen with a simple tap.
Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles* and tap the screen again or use control sticks to change direction.
A new AR route function shows the aircraft?s real-time flight direction for reference as its route is adjusted.
As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Pro or tilt the gimbal as required without changing the direction of flight.
In total, there are now three TapFly modes:
TapFly Forward: Tap to fly in the selected direction
TapFly Backward: Tap to fly in the opposite direction of the tap, i.e. tap in the bottom right corner of the screen to fly backward towards the top left.
TapFly Free: Lock the forward direction of the Phantom without locking the camera direction allowing it to turn as it flies.
*Obstacle Avoidance is not available with TapFly Free
 
Return to Home
In its upgraded Return to Home mode, the Phantom 4 Pro can automatically choose the best route to return home depending on environmental conditions.
It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 Pro is also able to adjust its flight path to avoid obstacles it has seen during its flight.
At takeoff, the Phantom 4 Pro will record the scene below and compare its recording with what it sees as it returns, for more precise landing.
It can also detect the ground to see whether there is suitable spot for landing.
If any obstacles are found, or there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
Gesture
Using Gesture Mode, selfies can be captured easily using a few gestures without the remote controller.
Advanced computer vision technology allows the Phantom 4 Pro to take instructions through gestures.
The subject simply lifts their arms when facing the camera and the aircraft will recognize this movement by locking on and placing the subject in the center of the frame.
When ready for a photo, the subject holds their arms out to signal the aircraft.
A three second countdown will begin, making time to strike a pose, allowing moments to be captured without the remote control.
Draw is a brand new technology for waypoint control. Simply draw a route on screen and the Phantom 4 Pro will move in that direction while keeping its altitude locked.
This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios.
 
Lieferumfang:
1x Phantom 4 Pro
1x Fernsteuersender
1x 5870mAh Akku
4x Propellerpaar (1xCW, 1x CCW)
1x Ladegerät
1x Netzkabel für Ladegerät
1x Anleitung und Hinweise
1x USB OTG Kabel
1x Gimbalsicherung
1x Transportbox
1x Micro-USB-Kabel
1x Micro-SD Karte 16Gb
Technische Details
Hersteller
DJI
GPS
GPS und GLOONASS
Anzahl der Motoren
4
Zellenzahl Akku
4
CopterTyp
Kameracopter
Fertigungsgrad
RTF (Ready to Fly ) inkl. Sender
Ausstattung / Funktionen
inklusive GPS
inklusive Kamera
Videodownlink
Gimbal
Einsatzgebiet
Indoor
Outdoor
Für diesen Artikel gibt es auch Akkus
DJI Phantom 4 - Lipo Akku 4s 5380mAh (PART7)
Artikel-Nr.: GF2653
Verfügbarkeit:(Lieferzeit: auf Anfrage)
DJI GmbH
159,00 EUR
inkl. MwSt.
und zzgl. Versand

Stk.
zur Zeit nicht lieferbar
Durchschnittliche Kundenbewertung: 
Anzahl der : 0
Schreiben Sie eine Bewertung zu diesem Artikel und teilen Sie Ihre Beurteilung anderen Besuchern mit!
Aktueller Kp-Index (Rot = kritisch)

Wir raten dringend davon ab in Roten Phasen GPS und Kompass zu verwenden.